|
OVERALL VIEW OF COMPONENTS |
| 1. Mounting Clamp with 4 screws for secure mounting to
metal or plastic pin guard. |
| 2. Dove-tail hinge for mounting laser housing (3) to
mounting clamp (1). |
| 3. Laser housing with 4 adjustment screws for elevation
and left and right adjustments. Also houses 3 #393 batteries. |
| 4. Sur-C Lens creates a holograph field from 10-50 yds. at
night (with dot in center of field) so you can see your target. |
|
|
| UNIVERSAL STYLE MOUNTING INSTRUCTIONS |
| 1. Slide 2" pin into 1/4" hole of choice
on sight bracket, or drill 1/4" hole of choice. |
| 2. Secure with 1/4-20 washer & nut |
| 3. Slide laser mount onto pin to desired position.
Preferably aligned with sight pins (left and right). |
| 4. Tighten lock screw on 2" pin to secure. |
| NOTE: KEEP WIRE OUT OF ARROW PATH |
|
|
| CLAMP STYLE MOUNTING INSTRUCTIONS |
| 1. Attach laser clamping bracket to pin guard. |
| 2. Position laser clamp on pin guard to desired position. |
| 3. Tighten clamp screw to secure to mount. |
| 4. Run switch wire in an out-of-the-way path to riser of
bow. |
| 5. Secure wire to front of riser for index finger with the
provided velcro. |
| NOTE: KEEP WIRE OUT OF ARROW PATH |
|
|
| BATTERY INSTALLATION INSTRUCTIONS |
| 1. Remove battery cap. |
| 2. Place batteries into receptacle with negative (-) side
inward & positive (+) outward |
| 3. Battery cap must contact the positive (+) battery side. |
| 4. Keep battery cap face and screw threads clean as they
are parts of an electrical circuit. |
| 5. Handle battery cap & receptacle carefully to avoid
stripping or crossthreading. |
|
|
|
PIN GUARD HORIZONTAL MOUNTING |
| 1. Use rear adjusting screws, above & below hinge
screw to adjust windage. |
| 2. Use side adjusting screws to adjust elevation. |
PIN GUARD VERTICAL MOUNTING |
| 1. Use side adjusting screws to adjust windage. |
| 2. Use rear adjust screws to adjust elevation. |
| NOTE: USE CAUTION WHEN SETTING ADJUSTMENTS |
|