105MS - is a vibration
controlled timer circuit that senses vibration and provides power to the product in use.
The circuit will then cut power to the product 30 seconds after vibration stops.
The sensitivity and the amount of time the circuit operates are both adjustable.
The vibration portion of the circuit can also be modified to accommodate a
momentary switch for turning the product on and off instead of vibration.
Excellent for driving - Lasers and LED's.
|
|
| 105MS
- Size: |
35mm
L x 25.5mm W x 9.0mm T |
| Input
Voltage: |
3v
DC, 24v DC Nominal |
| Power
Control: |
On-Board
Potentiometer |
| Supplied
Current: |
0-200mA2 |
| Feedback
Loop: |
Monitor
photodiode feedback |
| Output
Power Stability: |
+/-0
. 1% (at 25 degrees Celsius) |
| Photodiode
Monitor Current: |
From
6uA up to 2500mA |
Consult
NVG for Proper Information |
|
| Output
Type: |
CW
(Continuous Wave) |
| Substrate: |
F4 |
|
BACK
